Synthesis of tertiary amine‐based pH‐responsive polymers by RAFT Polymerization

Well‐defined tertiary amine‐based pH‐responsive homopolymers and block copolymers were synthesized via reversible addition‐fragmentation chain transfer (RAFT) polymerization using 4‐cyanopentanoic acid dithiobenzoate (CPAD) as the RAFT agent for homopolymers and a poly(ethylene glycol) (PEG) macro‐RAFT agent for the block copolymers. ¹H NMR and gel permeation chromatography results confirmed the successful synthesis of these homopolymers and block copolymers. Kinetics studies indicated that the formation of both the homopolymers and the block copolymers were well defined. The pKa titration experiments suggested that the homopolymers and the related block copolymers have a similar pKa. The dynamic light scattering investigation showed that all of the block copolymers underwent a sharp transition from unimers to micelles around their pKa and the hydrodynamic diameter (D_h) was not only dependent on the molecular weight but also on the composition of the block copolymers. The polymer solution of PEG‐b‐PPPDEMA formed the largest micelle compare to the PEG‐b‐PDPAEMA and PEG‐b‐PDBAEMA with a similar molecular weight. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1010–1022     

Intermolecular Stetter reaction of aromatic aldehydes with (E)-(2-nitrovinyl)cyclohexane induced by N-heterocyclic carbene and thiourea

Intermolecular Stetter reaction of aromatic aldehydes with (E)-(2-nitrovinyl)cyclohexane catalyzed by thiazolium A has been developed. The reaction rate and efficiency are profoundly impacted by the presence of thiourea B. The reaction affords moderate to good yields of the Stetter product. Some factors influencing yield were discussed.     

A Mechanistic Investigation of the Kinetic Resolution of Secondary Aromatic Alcohols Using a Ferrocene‐Based Planar Chiral 4‐(Dimethylamino)pyridine Catalyst

A detailed computational and kinetic analysis of the acetylation of 1‐phenylethanol with acetic anhydride catalyzed by planar chiral 4‐(dimethylamino)pyridine (DMAP) catalyst (?)‐ 1 is presented. The study includes a computational investigation of the potential‐energy surface including the acylation and stereoselective transition states at the DFT level of theory. Experimentally, the kinetic study shows that the reaction proceeds in a first‐order manner in catalyst, whereas both substrates, acetic anhydride and 1‐phenylethanol, show fractional order, which is in accordance with steady‐state conditions. The fractional order depends on an equilibrium between the free catalyst and the acetylated catalyst.     

Monitoring of the shrinkage during the photopolymerization of acrylates using hyphenated photorheometry/near‐infrared spectroscopy

This article describes a new method for the quantitative determination and time‐resolved monitoring of the polymerization shrinkage during ultraviolet (UV) photopolymerization. It is based on rheometry using a modified oscillating rheometer. Shrinkage is determined from the decrease of the gap between the rheometer plates. Moreover, near‐infrared (NIR) spectra can be recorded directly in the rheometer, which allows continuous determination of the conversion at any time of a shrinkage measurement. As both shrinkage and conversion data come from the same experiment, shrinkage can be analyzed in dependence on the current conversion achieved during UV irradiation, which enables direct investigation of correlations between both parameters. Hyphenated photorheometry/FT‐NIR spectroscopy was used for the determination of the polymerization shrinkage of pure acrylate monomers and oligomers as well as acrylate‐based formulations. Quantitative shrinkage values were found to be in excellent correlation with data that were determined by an independent method (via buoyancy measurements) and data from literature. Furthermore, the effect of ambient and irradiation conditions or the content of nanoparticles on the degree of shrinkage was studied. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 729–739     

Lewis Acids as Activators in CBS‐Catalysed Diels–Alder Reactions: Distortion Induced Lewis Acidity Enhancement of SnCl4

The effect of several Lewis acids on the CBS catalyst (named after Corey, Bakshi and Shibata) was investigated in this study. While ²H NMR spectroscopic measurements served as gauge for the activation capability of the Lewis acids, in situ FT‐IR spectroscopy was employed to assess the catalytic activity of the Lewis acid oxazaborolidine complexes. A correlation was found between the Δδ(²H) values and rate constants k_DA, which indicates a direct translation of Lewis acidity into reactivity of the Lewis acid–CBS complexes. Unexpectedly, a significant deviation was found for SnCl₄ as Lewis acid. The SnCl₄–CBS adduct was much more reactive than the Δδ(²H) values predicted and gave similar reaction rates to those observed for the prominent AlBr₃–CBS adduct. To rationalize these results, quantum mechanical calculations were performed. The frontier molecular orbital approach was applied and a good correlation between the LUMO energies of the Lewis acid–CBS–naphthoquinone adducts and k_DA could be found. For the SnCl₄–CBS–naphthoquinone adduct an unusual distortion was observed leading to an enhanced Lewis acidity. Energy decomposition analysis with natural orbitals for chemical valence (EDA‐NOCV) calculations revealed the relevant interactions and activation mode of SnCl₄ as Lewis acid in Diels–Alder reactions.     

Mechanism of Insertion Reactions between Silylenoid H2SiLiF and GeH3R (R =F,OH, NH2): a Theoretical Study

Theoretical investigations on the insertion reaction mechanisms of three- membered-ring silylenoid H2 Si Li F with GeH 3R(R = F, OH, NH2) have been systematically carried out by combined density functional theory(DFT) and ab initio quantum chemical calculations. The geometries of all stationary points for these reactions were optimized using the B3 LYP method and then the QCISD method was used to calculate the single-point energies. The calculated results indicate that, there are one precursor complex(Q), one transition state(TS), and one intermediate(IM) which connect the reactants and the products along the potential energy surface. The insertion reactions of three-membered-ring silylenoid with Ge H3 R proceed in a concerted manner, forming H2RSi-Ge H3 and Li F. The calculated potential energy barriers of the three reactions are 29.17, 30.90, and 54.07 k J/mol, and the reaction energies for the three reactions are –127.05, –116.91, and –103.31 k J/mol, respectively. The insertion reactions in solvents are similar to those in vacuum. Under the same situation, the insertion reactions should occur easily in the following order: GeH 3-F GeH 3-OH GeH 3-NH2. The elucidations of the mechanism of these insertion reactions provided a new mode of silicon-germanium bond formation.     

Specific Design of Titanium(IV) Phenolato Chelates Yields Stable and Accessible,Effective and Selective Anticancer Agents

Octahedral titanium(IV) complexes of phenolato hexadentate ligands were developed and showed very high stability for days in water solutions. In vitro cytotoxicity studies showed that, whereas tetrakis(phenolato) systems are generally of low activity presumably due to inaccessibility, smaller bis(phenolato)bis(alkoxo) complexes feature high anticancer activity and accessibility even without formulations, also toward a cisplatin‐resistant cell line. An all‐aliphatic control complex was unstable and inactive. A leading phenolato complex also revealed: 1) high durability in fully aqueous solutions; accordingly, negligible loss of activity after preincubation for three days in medium or in serum; 2) maximal cellular accumulation and induction of apoptosis following 24–48 h of administration; 3) reduced impact on noncancerous fibroblast cells; 4) in vivo efficacy toward lymphoma cells in murine model; 5) high activity in NCI‐60 panel, with average GI₅₀ of 4.6±2 μm . This newly developed family of Ti^IV complexes is thus of great potential for anticancer therapy.     

Attapulgite grafted with polystyrene via a simultaneous reverse and normal initiation atom transfer radical polymerization

The surface grafting of attapulgite (ATP) with polystyrene (PS) was established via a simultaneous reverse and normal initiation atom transfer radical polymerization (SR&NIATRP). 4‐(chloromethyl)phenyltrimethoxysilane (CMPTMS) chemical bounded on the surface of ATP (ATP‐Cl, Cl‐I) was prepared via one‐step self‐assembly. SR&NI ATRP of styrene was conducted using CuCl₂ complex tris(2‐(dimethylamino)ethyl)amine (Me₆‐TREN) as the catalytic system, initiated by 2,2‐azobis(isobutyronitrile) (AIBN) and ATP‐Cl. FT‐IR, XRD, XPS, TGA and TEM data were consistent with the grafting of benzyl chloride groups and PS chains on ATP surface. The controllability of polymerization was investigated by the kinetics behavior under different molar ratio of AIBN and CuCl₂. The obtained polymer possessed a uniform distribution of molecular weights with a lower polydispersity index of 1.2～1.4. The relationship between polymerization on the surface of ATP and in solution was discussed in detail based on TGA data of hybrid particles and GPC trace of free polymer in solution. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1508–1516     

Well‐controlled ATRP of 2‐(2‐(2‐azidoethyoxy)ethoxy)ethyl methacrylate for high‐density click functionalization of polymers and metallic substrates

The combination of atom transfer radical polymerization (ATRP) and click chemistry has created unprecedented opportunities for controlled syntheses of functional polymers. ATRP of azido‐bearing methacrylate monomers (e.g., 2‐(2‐(2‐azidoethyoxy)ethoxy)ethyl methacrylate, AzTEGMA), however, proceeded with poor control at commonly adopted temperature of 50 °C, resulting in significant side reactions. By lowering reaction temperature and monomer concentrations, well‐defined pAzTEGMA with significantly reduced polydispersity were prepared within a reasonable timeframe. Upon subsequent functionalization of the side chains of pAzTEGMA via Cu(I)‐catalyzed azide‐alkyne cycloaddition (CuAAC) click chemistry, functional polymers with number‐average molecular weights (M_n) up to 22 kDa with narrow polydispersity (PDI < 1.30) were obtained. Applying the optimized polymerization condition, we also grafted pAzTEGMA brushes from Ti6Al4 substrates by surface‐initiated ATRP (SI‐ATRP), and effectively functionalized the azide‐terminated side chains with hydrophobic and hydrophilic alkynes by CuAAC. The well‐controlled ATRP of azido‐bearing methacrylates and subsequent facile high‐density functionalization of the side chains of the polymethacrylates via CuAAC offers a useful tool for engineering functional polymers or surfaces for diverse applications. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1268–1277